General Description EM78P153S is an 8-bit microprocessor with low-power and high-speed CMOS technology. It is equipped with a 1024 x 13-bits Electrical One Time Programmable Read Only Memory (OTP-ROM) within it. It provides a PROTECTION bit to prevent intrusion of user’s code in the OTP memory as well as 15 OPTION bits to match user’s requirements. With its OTP-ROM feature, the EM78P153S offers users a convenient way of developing and verifying their programs. Moreover, user developed code can be easily programmed with the ELAN writer. Features • 14-lead packages : EM78P153S • Operating voltage range : 2.3V~5.5V • Available in temperature range: 0°C~70°C • Operating frequency range (base on 2 clocks): * Crystal mode: DC~20MHz at 5V, DC~8MHz at 3V, DC~4MHz at 2.3V. * ERC mode: DC~4MHz at 5V, DC~4MHz at 3V, DC~4MHz at 2.3V. • Low power consumption: * less then 1.5 mA at 5V/4MHz * typical of 15 µA, at 3V/32KHz * typical of 1µA, during the sleep mode • 1024 x 13 bits on chip ROM • Built-in calibrated IRC oscillators (8MHz, 4MHz, 1MHz, 455KHz ) • Programmable prescaler of oscillator set-up time • One security register to prevent the code in the OTP memory from intruding • One configuration register to match the user’s requirements • 32× 8 bits on chip registers (SRAM, general purpose register) • 2 bi-directional I/O ports • 5 level stacks for subroutine nesting • 8-bit real time clock/counter (TCC) with selective ** sources and trigger edges, • and with overflow interrupt • Power down mode (SLEEP mode) • Three available interruptions * TCC overflow interrupt * Input-port status changed interrupt (wake up from the sleep mode) * External interrupt • Programmable free running watchdog timer • 7 programmable pull-high I/O pins • 7 programmable open-drain I/O pins • 6 programmable pull-down I/O pins • Two clocks per instruction cycle • Package type: 14 pins SOP, DIP * 14 pin DIP 300mil: EM78P153SP * 14 pin SOP 150mil: EM78P153SN • The transient point of system frequency between HXT and LXT is around 400KHz.